Product Series

FINGER JOINTING SERIES

> Horizontal Auto Finger Jointing Line

30 years of manufacturing experience
The most comprehensive range of finger jointing equipment

FHL-60

HORIZONTAL FINGER SHAPING!
FULLY OR AUTO OPERATION!
HIGH SPEED!
Single chain drive to eliminate run-out problem!
Horizontal finger shaping creates better outlook of product!
FEATURES

Especially ideal for producing solid wood parquet.
Maximum Production rate 60 pcs/min.
Double sides pressing on assemble press.

  • More

    Automatic Wood Arranging Conveyor Table (Optional)

    The automatic wood arranging conveyor table provides an automatic infeed of wood, that dramatically increases productivity.

    It is constructed of a conveyor table combined with brushes for auxiliary infeed of wood.

    Close
  • More

    CHAIN DRIVE PRE-PRESS ASSEMBLY STAND

    The pre-press assemble stand employs chain feed, and provides 3 and 6 meters of length to choose from.

    This assemble stand provides pre-pressed board ready to be cut to length, and ensures accurate vertical and horizontal alignment of finger joint.

    Close
  • More

    Wood Side Change Device

    After left finger shaping is performed, the side change device moves wood to the opposite side for shaping right finger.

    The device is equipped with a pressure sensor.

    In case wood is jammed, the machine stops automatically.

    Close
  • More

    ASSEMBLE PRESS (Double Sides Pressing)

    The assemble press employs two hydraulic cylinder at front and rear, providing more powerful and faster jointing performance.

    This special design also assure extremely consistent jointing effect on the entire wood.

    Close
SPECIFICATIONS

HORIZONTAL FINGER SHAPER

MODEL F-C61
Range of workpiece length 150 - 700 mm
Range of workpiece width 40 - 200 mm
Range of workpiece height 16 - 60 mm
Tirmming saw speed 2800 rpm (50hz), 3400rpm (60hz)
Finger cuter speed 5000 rpm
Scoring saw speed 2800 rpm (50hz), 3400rpm (60hz)
MOTOR HORSEPOWER  
Feed of chain motor 7-1/2 HP
Trim saw motor (and scoring saw) 10 HP x 2
Shaper cutter motor 20 HP x 2
Scoring saw motor 1 HP x 3
Cutter spindle diameter ø70 mm
Dia of Cutter (in/out) ø210 mm
Dust hood outlet diameter 6" x 2, 4" x 4
Machine dimensions (LxHxW) 6260 x 1510 x 2550 mm

* The above data are not binding to details as improvements are incorporated from time to time.

AUTO ASSEMBLE PRESS - F-A63

MODEL 6M
Available length of product 6200 mm
Available thickness of product 16 - 60 mm
Available width of product 40 - 200 mm
Feeding speed 80 m/min
Product length capacity 5 - 7 pcs/mim
POWER REQUIRED  
Feed drive motor 2 HP
Max. assembly pressure 0 ~ 150 Kg/cm²
Hydraulic power unit 5 HP
Cut-off saw 5 HP
Dust hood outlet diameter 4" (101.6mm)
Machine dimensions (LxHxW) 7400 x 1400 x 1380 mm
Noise level 84 Db
Packing dimensions (LxHxW) 7500 x 1500 x 1060 mm

* The above data are not binding to details as improvements are incorporated from time to time.

CHAIN DRIVE PRE-PRESS ASSEMBLY STAND - F-T67

MODEL 6M
Range of workpiece height 16 - 60 mm
Range of workpiece width 40 - 200 mm
Feeding speed 140 m/min.
Feed drive motor 2 HP x 2
Feed converyor motor 2 HP
Brush wheel drive motor 1/2 HP
Wheel drive motor 1/2 HP
Overall length 6710 mm
Overall width 1140 mm
Overall height 1110 mm
Packing dimensions (LxHxW) 6620 x 1200 x 1220 mm

* The above data are not binding to details as improvements are incorporated from time to time.

MANUAL FEEDING TABLE

MODEL F-I31
Conveyor table motor 700 mm
Feed drive motor 1 HP
Machine length 2500 mm
Machine width 950 mm
Machine height 910 mm

* The above data are not binding to details as improvements are incorporated from time to time.

AUTO FEEDING TABLE

MODEL F-I32
Conveyor table motor 700 mm
Feed drive motor 1 HP
Brush wheel drive motor 1 HP
Machine length 2510 mm
Machine width 1500 mm
Machine height 1600 mm

* The above data are not binding to details as improvements are incorporated from time to time.

˄