Product Series

FINGER JOINTING SERIES

> Fully Auto Finger Jointing Line

30 years of manufacturing experience
The most comprehensive range of finger jointing equipment

FL-03

A high speed finger jointing line that dramatically upgrades finger jointing to a new level of efficiency.
FEATURES

Suitable for wood length 2-300mm and over.
Fully automatic operation.
Automatic feeding table.
Pre-press assemble stand.

  • More

    RIGHT SHAPING MECHANISM

    The mechanism performs scoring, trimming, shaping operations on right end of the workpiece.

    Scoring blade in front of trimming blade cuts bottom edge to give splinter-free finish.

    Close
  • More

    CUTTER PRESETTER

    A cutter presetter is built on the right shaper for convenient cutter assembly.

    Close
  • More

    LEFT SHAPING MECHANISM

    The mechanism performs scoring, trimming, shaping and gluing operation on left end of the workpiece.

    Scoring blades cut top and bottom edges to prevent fear-out.

    Close
  • More

    ACCURATE SAWBLADE ADJUSTMENT

    The trimming and scoring sawblade position are adjusted on the precision rod guides, which are hard chrome-plated for maximum wear resistance.

    Close

FL-03-3

3 METERS JOINTING CAPACITY!
Ideal for both long and short wood
FEATURES

Long wood 3 meters.
Short wood 150mm.
High speed production.
Production rate 2-4 cycles/min (long wood).
Production rate 4-6 cycles/min (long wood).
Feed system on right/left finger shaper is driven by servo motor.

  • More

    FINGER SHAPER (Right End)

    It combines three functions-scoring, trimming, shaping in a unit on right end of the workpiece.

    Close
  • More

    ASSEMBLE PRESS

    The assemble press employs two hydraulic cylinder at front and rear, providing more powerful and faster jointing performance.

    This special design also assure extremely consistent jointing effect on the entire wood.

    Close
  • More

    FINGER SHAPER (Left End)

    It combines four functions-trimming, scoring, shaping and gluing on left end of the workpiece.

    Close
  • More

    AUTOMATIC FEEDING TABLE 3 METERS LONG

    Located in front of pre-press assemble stand, this automatic feeding table allows workpieces to feed, one by one, eliminating operator’s efforts.

    Close

FL-12

FULLY AUTO OPERATION!
HIGH SPEED!
HIGH THROUGHPUT!
FEATURES

Designed for wood length 2-300 mm and less.
Servo motor drive provides production rate up to 3-4 cycles/min.
Double sides pressing on assemble stand.

  • More

    AUTOMATIC FEEDING TABLE

    Located in front of pre-press assemble stand, this automatic feeding table allows workpiece to feed one by one, eliminating operator's effort.

    Close
  • More

    Production Flow Chart

    Close
  • More

    FULLY AUTOMATIC PRODUCTION PROCESS

    Close
  • More

    Production Flow Chart

    Close
SPECIFICATIONS
FL-03

MULTI-STAGE INITIAL CONVEYOR TABLE

MODEL F-I01
Conveyor table width 650 mm
Table height 860 mm
Feed drive motor 1 HP x 3
Overall length 3250 mm
Overall width 860 mm
Overall height 960 mm
Machine dimensions (LxHxW) 3350 x 1175 x 960 mm
Packing dimensions (LxHxW) 4190 x 1175 x 1780 mm

* The above data are not binding to details as improvements are incorporated from time to time.

FINGER SHAPER (RIGHT END)

MODEL F-C05
Max. working table width 650 mm
Range of workpiece length 150 - 1000 mm
Range of workpiece height 20 - 160 mm
Trimming saw speed 2800 rpm (50hz), 3400rpm (60hz)
Finger cutter speed 5000 rpm
Scoring saw speed 2800 rpm (50hz), 3400rpm (60hz)
MOTOR HORSEPOWER  
For table drive 1/2 HP
For scoring saw 1 HP
Trimming saw motor 10 HP
For finger cutter spindle 20 HP
Finger cutter spindle dia. ø50 mm
Finger cutter specif. (I.D./Max.O.D.) ø70 / ø160 mm
Dust outlet diameter 6" x 2
Machine dimensions (LxHxW) 3670 x 1905 x 2155 mm
Noise level 88.2 Db
Packing dimensions (LxHxW) 3810 x 2120 x 2270 mm

* NOTE : ø50mm collar clamp with various thickness for finger cutter are optional accessories to be ordered.

FINGER SHAPER (LEFT END)

MODEL F-C06
Max. working table width 650 mm
Range of workpiece length 150 - 1000 mm
Range of workpiece height 20 - 160 mm
Trimming saw speed 2800 rpm (50hz), 3400rpm (60hz)
Finger cutter speed 5000 rpm
Upper scoring saw speed 2800 rpm (50hz), 3400rpm (60hz)
Lower scoring saw speed 2800 rpm (50hz), 3400rpm (60hz)
MOTOR HORSEPOWER  
For table drive 1/2 HP x 2
For upper scoring saw 1 HP
For lower scoring saw 1 HP
For trimming saw 10 HP
For finger cutter spindle 20 HP
Finger cutter specif. (I.D./Max.O.D.) ø70 / ø160 mm
Dust outlet diameter 6" x 2
Machine dimensions (LxHxW) 4160 x 1905 x 2155 mm
Noise level 88.2 Db
Packing dimensions (LxHxW) 4855 x 2120 x 2270 mm

* NOTE : ø50mm collar clamp with various thickness for finger cutter are optional accessories to be ordered.

AUTOMATIC FEEDING TABLE

MODEL F-D01
Conveyor table width 650 mm
Table height 860 mm
Range of workpiece length 150 - 1000 mm
Range of workpiece height 20 - 160 mm
MOTOR HORSEPOWER  
Infeed drive motor 1 HP
Outfeed drive motor 2 HP
Brush roller drive motor 1/8 HP
Overall length 1540 mm
Overall width 1545 mm
Overall height 2450 mm

* The above data are not binding to details as improvements are incorporated from time to time.

CHAIN DRIVE PRE-PRESS ASSEMBLY STAND

MODEL F-T03
Max. pre-press length 6000 mm
Range of workpiece width 20 - 200 mm
Range of workpiece height 20 - 100 mm
Feed speed 80 m/mim
MOTOR HORSEPOWER  
For left transmission 2 HP
For right transmission 2 HP
Machine dimensions (LxHxW) 6035 x 1060 x 1000 mm
Noise level 70 Db
Packing dimensions (LxHxW) 6070 x 1275 x 1120 mm

* The above data are not binding to details as improvements are incorporated from time to time.

ASSEMBLE PRESS (DOUBLE SIDES PRESSING) - F-A03

MODEL 6M 6.8M
Max. product length 6200 mm 6800 mm
Range of material width 20 - 160 mm 20 - 160 mm
Range of material height 20 - 60 mm 20 - 60 mm
Feed speed 80 m/mim 80 m/mim
Range of pressing pressure 0 ~ 150 Kgs/cm² 0 ~ 150 Kgs/cm²
Production rate Max. 5 - 6 pcs/mim Max. 5 - 6 pcs/mim
MOTOR HORSEPOWER    
For feeding 2 HP 2 HP
For hydraulic pump 7-1/2 HP 7-1/2 HP
For sizing saw 5 HP 5 HP
Saw arbor diameter ø1" (ø25.4mm) ø1" (ø25.4mm)
Dust outlet diameter 4" (101.6mm) 4" (101.6mm)
Machine dimensions (LxHxW) 7670 x 1370 x 1510 mm 8270 x 1370 x 1510 mm
Noise level 84 Db 84 Db
Packing dimensions (LxHxW) 7745 x 1585 x 1150 mm 8345 x 1585 x 1150 mm

* The above data are not binding to details as improvements are incorporated from time to time.

FL-03-3

TABLE SINGLE FENCE (INITIAL CONVEYOR) - F-I03

MODEL 2M 3M
Table width 650 mm 650 mm
Table length 2000 mm 3000 mm
Conveyor table motor 2 HP 2 HP
Machine length 2050 mm 3050 mm
Machine width 1020 mm 1020 mm
Machine height 1060 mm 1060 mm
Packing dimensions (LxHxW) 2180 x 1175 x 1120 mm 3180 x 1175 x 1120 mm

* The above data are not binding to details as improvements are incorporated from time to time.

TABLE SINGLE FENCE (INITIAL CONVEYOR) - F-I15

MODEL 2M 3M
Table width 650 mm 650 mm
Table length 2000 mm 3000 mm
Conveyor table motor 2 HP 2 HP
Machine length 2050 mm 3050 mm
Machine width 1080 mm 1080 mm
Machine height 1060 mm 1060 mm
Machine width (With auxiliary support) 3140 mm 3140 mm
Packing dimensions (LxHxW) 2180 x 1175 x 1120 mm 3180 x 1175 x 1120 mm

* The above data are not binding to details as improvements are incorporated from time to time.

FINGER SHAPER (RIGHT END)

MODEL F-C05
Max. working table width 650 mm
Range of workpiece width 150 - 1000 mm
Range of workpiece height 20 - 200 mm
Trimming saw speed 2800 rpm (50hz), 3400rpm (60hz)
Finger cutter speed 5000 rpm
Scoring saw speed 2800 rpm (50hz), 3400rpm (60hz)
MOTOR HORSEPOWER  
Table-drive servo motor 1.0 kw
For conveyor motor 1/2 HP
Scoring saw motor 1 HP
Trim saw motor 10 HP
Shaper cutter motor 20 HP
Dia. of Cutter (in/out) ø70 / ø160 mm
Main Sawblade (Trim saw) 3t x ø255
Auxiliary Sawblade (Trim saw) 12t x ø240
Dust hood outlet diameter 6" x 1, 4" x 2
Machine dimensions (LxHxW) 3010 x 1370 x 2020 mm
Noise Value 88.2 dB
Packing dimensions (LxHxW) 3120 x 1470 x 2150 mm

* NOTE : ø50mm collar clamp with various thickness for finger cutter are optional accessories to be ordered.

FINGER SHAPER (LEFT END)

MODEL F-C06
Max. working table width 650 mm
Range of workpiece width 150 - 1000 mm
Range of workpiece height 20 - 200 mm
Trimming saw speed 2800 rpm (50hz), 3400rpm (60hz)
Finger cutter speed 5000 rpm
Scoring saw speed 2800 rpm (50hz), 3400rpm (60hz)
MOTOR HORSEPOWER  
Table-drive servo motor 1.0 kw
For conveyor motor 1/2 HP x 2
Scoring saw motor 1 HP x 2
Trim saw motor 10 HP
Shaper cutter motor 20 HP
Dia. of Cutter (in/out) ø70 / ø160 mm
Main Sawblade (Trim saw) 4t x ø255
Auxiliary Sawblade (Trim saw) 12t x ø240
Dust hood outlet diameter 6" x 1, 4" x 2
Machine dimensions (LxHxW) 3600 x 1640 x 2100 mm
Noise Value 88.2 dB
Packing dimensions (LxHxW) 3710 x 1760 x 2220 mm

* NOTE : ø50mm collar clamp with various thickness for finger cutter are optional accessories to be ordered.

INITIAL CONVEYOR TABLE - F-I07

MODEL 2M
Table width 650 mm
Table length 2000 mm
Conveyor table motor 2 HP
Machine length 2050 mm
Machine width 1020 mm
Machine height 1060 mm
Packing dimensions (LxHxW) 2180 x 1175 x 1120 mm

* The above data are not binding to details as improvements are incorporated from time to time.

CHAIN TYPE PRE-PRESS ASSEMBLE STAND (LESS INFEED CONVEYOR TABLE) - F-T03-6

MODEL 6M
Range of workpiece height 20 - 100 mm
Range of workpiece width 20 - 200 mm
Feed speed 140 m/mim
Feed drive motor 2 HP x 2
Machine length 6290 mm
Machine width 1140 mm
Machine height 1110 mm
Packing dimensions (LxHxW) 6400 x 1200 x 1220 mm

* The above data are not binding to details as improvements are incorporated from time to time.

AUTOMATIC FEEDING TABLE 3 METERS LONG - F-D01-3

MODEL 1M 3M
Auto feeding table 650 mm 650 mm
Range of workpiece height 150 - 1000 mm 150 - 3000 mm
Range of workpiece width 20 - 160 mm 20 - 200 mm
Infeed motor 1 HP 2 HP
Feed drive motor 2 HP 3 HP
Brush wheel drive motor 1/8 HP 1/8 HP
Machine dimensions (LxHxW) 2830 x 1560 x 2590 mm 4830 x 1560 x 2590 mm
Packing dimensions (LxHxW) 2980 x 1670 x 2700 mm 4980 x 1670 x 2700 mm

* The above data are not binding to details as improvements are incorporated from time to time.

ASSEMBLE PRESS - F-A03-6.6

MODEL 6M 6.6M
Available length of product 6200 mm 6800 mm
Available thickness of product 20 - 60 mm 20 - 60 mm
Available width of product 20 - 160 mm 20 - 200 mm
Feed speed 80 m/mim 80 m/mim
Production rate Max. 5 - 6 pcs/mim Max. 5 - 6 pcs/mim
MOTOR HORSEPOWER    
Feed motor 2 HP 2 HP
Max. assembly pressure 0 ~ 150 Kg/cm² 0 ~ 150 Kg/cm²
Hydraulic power unit 5 HP 5 HP
Cut-off saw 5 HP 5 HP
Dust hood outlet diameter 4" (101.6mm) 4" (101.6mm)
Machine dimensions (LxHxW) 7400 x 1400 x 1380 mm 7800 x 1400 x 1380 mm
Noise Value 84 dB 84 dB
Packing dimensions (LxHxW) 7500 x 1500 x 1060 mm 7900 x 1500 x 1060 mm

* The above data are not binding to details as improvements are incorporated from time to time.

FL-12

FINGER SHAPER

MODEL F-C31
Max. working table width 650 mm
Range of workpiece width 150 ~ 1000 mm
Range of workpiece height 20 ~ 160 mm
Trimming saw , speed 2800 RPM / 50 HZ 3400 RPM / 60 HZ
Finger cuter speed 5000 RPM
Scoring saw , speed 2800 RPM / 50HZ, 3400 RPM / 60 HZ
MOTOR HORSEPOWER  
Table drive motor 2 HP
For conveyor 1/2 HP x 3
For scoring saw 1 HP x 3
For trimming saw 10 HP x 2
For finger cutter 20 HP x 2
Dust outlet diameter 6" x 2, 4" x 4
Machine dimension (LxWxH) 3750 x 3070 x 1650 mm
Packing dimension (LxWxH) 4850 x 2130 x 1750 mm

* The above data are not binding to details as improvements are incorporated from time to time.

ASSEMBLE PRESS

MODEL F-A08(4.5M) F-A08(6M)
Available length of product 4.5 m 6.2 m
Available thickness of product 60 mm 60 mm
Available width of product 160 mm 160 mm
Finger assembly pressure 0 - 150 kg/cm² 0 - 150 kg/cm²
Feeding speed 8 0m/min 80 m/min
6m length product capacity _ 5 PCS
4.5m length product capacity 4-6 PCS _
Hydraulic power unit 5 HP 5 HP
MOTOR HORSEPOWER    
For feeding 2 HP x 1, 3 HP x 1 2 HP x 1, 3 HP x 1
For sizing saw 5 HP 5 HP
Dust outlet diameter 4" x 1 4" x 1
Machine dimension (LxWxH) 8770 x 1380 x 1350 mm 10290 x 1380 x 1350 mm
Packing dimension (LxWxH) 5800 x 1480 x 1460 mm 7300 x 1480 x 1460 mm
Packing dimension (LxWxH) 3270 x 630 x 1180 mm 3270 x 630 x 1180 mm

* The above data are not binding to details as improvements are incorporated from time to time.

AUTOMATIC FEEDING TABLE

MODEL F-D01
Auto feeding table 650 mm
Range of workpiece height 150 - 1000 mm
Range of workpiece width 20 - 160 mm
motor 1 HP
Brush wheel drive motor 1/8 HP
Machine dimension (LxWxH) 1440 x 2660 x 1330 mm
Packing dimension (LxWxH) 1540 x 2760 x 1430 mm

* The above data are not binding to details as improvements are incorporated from time to time.

MANUAL FEEDING TABLE

MODEL F-I01
Auto feeding table 650 mm
Feed drive motor 1 HP x 3
Machine dimension (LxWxH) 3190 x 870 x 970 mm
Packing dimension (LxWxH) 3300 x 970 x 1070 mm

* The above data are not binding to details as improvements are incorporated from time to time.

STANDARD ACCESSORIES OPTIONAL EQUIPMENT
• Trimming sawblade 2 pcs.
• Hocking sawblade 2 pcs.
• Scoring sawblade 3 pcs.
• Cutter presetter 1 set.
• Shaper cutter grinder.

* The above data are not binding to details as improvements are incorporated from time to time.

˄