Product Series

4-SIDE PLANER / MOULDER SERIES

> M-410    (Three Phase Motor)

> M-410S (Single Phase Motor)

An Economical Choice for 4-side Moulding.

Powered table Elevation
OUTSTANDING FEATURES

Single or Three phase motor drive.
Powerful motor drive for each spindle.
Digital position control for accurate and easy setting.
7,000 rpm high spindle speed.
Compact construction. Maximum stability.
Variable feed speed.
See-thru top guard.

GREAT CAPACITY

Planing 11-5/8"(W) x 9"(D).
2-side planing / moulding 11-3/4""(W) x 9""(D).
4-side planing / moulding 10-1/4"(W) x 4"(D).

4-SIDE PLANER / MOULDER SERIES M-410

  • More

    VARIABLE FEED SPEED

    Variable feed speed is achieved through a disco type variable speed unit combined with gear reducer, making this moulder ideal for cutting soft and hard wood material.

    Variable feed speed range is 11 - 52 feet per minute.

    Close
  • More

    FOUR CUTTERHEADS LAYOUT

    Max. Working width 10"" (250mm).

    Max. Profile depth 3/8" (10mm).

    Close
  • More

    LEFT VERTICAL SPINDLE ADJUSTMENT

    The left vertical spindle can be adjusted in forward and backward direction to suit workpiece width.

    A front mounted mechanical meter is equipped for convenient and accurate reading of the spindle adjustment amount.

    Close
  • More

    TOP HORIZONTAL SPINDLE

    Equipped with two planer knives and two pattern knives for planing and moulding operations amount.

    Close
  • More

    CENTRALIZED CONTROL RANEL

    All motion controls of the machine are centralized on the control panel, located at the left side of the machine for easy access and operation convenience.

    Each cutterhead is individually controlled on the control panel.

    Close
  • More

    MANUAL TABLE ELEVATION

    The entire table can be raised or lowered by manually turning a lever through worm gear transmission for effortless elevation.

    Mechanical meter for accurate reading of thickness adjustment.

    Close

4-SIDE PLANER / MOULDER SERIES M-410

  • More

    TABLE ELEVATION LIMIT SWITCHES

    The table raising and lowering limit are controlled by top and bottom limit switches to avoid accident of over-travel.

    Close
  • More

    EFFICIENT DUST SUCTION DESIGN

    The dust suction mechanisms for the right and left spindle are specially designed to achieve better suction performance.

    Close
  • More

    DEPENDABLE CONTROL CIRCUIT

    The control circuit inside the electric cabinet consists of high quality electronic components, that assures dependable control and long service life.

    Control circuit meets CE standard is available upon request.

    Close
  • More

    ADDITIONAL OUTFEED FENCE

    An adjustable outfeed fence is provided at the outfeed end of the table. This additional fence ensures straight outfeed of wood especially when cutting short wood.

    Close
Features

4-side Planer / Moulder

Durable Table

The table is manufactured from high quality cast iron and scientifically rib reinforced without deformation.

The table surface are hard-chrome plated and precision ground for maximum wear resistance.

INFFED FENCE (OPTIONAL)

The infeed fence is built by aluminum alloy and anode treated for durability.

Standard length of infeed fence is 1250mm.

INFEED AND OUTFEED TABLE EXTENSION (OPTIONAL)

The moulder is available is to equip with table extensions at infeed and outfeed end. They provide solid support for big wood.

INFEED AND OUTFEED TABLE EXTENSION (OPTIONAL)

The in feed and outfeed table are made of steel plate.

INFEED AND OUTFEED TABLE EXTENSION (OPTIONAL)

Each one measures 1210mm(L)x317mm(W) on model M-410, and 1210mm(L)x362(W) on model M-412.

Optional

For Increasing Operational Convenience

VERTICAL SPINDLE CUTTER

Cutter height range 38 and 100mm (1/2" and 4").

Choice of two cutter configuration.

TWO CUTTING ANGLES ON ONE CUTTER

4-knife cutter can be mounted with two different cutting angles of knives, allowing for cutting soft and hard wood.

DUST BLOWER

The dust blower is driven by a 3HP motor, single or three phase power.

Designed with 4 dust suction ports.

EASY mobility

The moulder is equipped with four wheels at the four corners for easy movement by only one person.

The operator may treadle on the foot plate for raising the machine when moving the machine is required.

C-30HP. / C-40HP. / C-50HP.
Automatically Operated Rotary Phase Converter

Suitable for converting 230V, 1 phase to 230V, 3 phase power.

Mulitple motor control within the 95% of the rated horsepower.

UNIVERSAL KNIFE

Designed for sharpening straight knife and profile knife.

Foot switch control for convenience.

PROFILE KNIFE GRINDER

Designed for grinding the profile knife.

Profile knife is reproduced by an acrylic template.

Equipped with one diamond dresser.

MODEL

Permissible Load 95%

Profile Knives

CKM provides an extraordinary selection of high quality profile knives to meet your specific requirements

Specifications

MODEL M-410 M-410S
PLANING    
Width 11-5/8" (320mm) 11-5/8" (320mm)
Depth 7/16-9" (12-230mm) 7/16-9" (12-230mm)
2-SIDE PLANING / MOULDING    
Width 11-3/4" (300mm) 11-3/4" (300mm)
Length 7/16-9" (12-230mm) 7/16-9" (12-230mm)
4-SIDE PLANING / MOULDING    
Width 0-10-1/4" (0-260mm) 0-10-1/4" (0-260mm)
Length 7/16-4" (12-100mm) 7/16-4" (12-100mm)
TOP HORIZONTAL SPINDLE    
Width 16" (410mm) 16" (410mm)
Max. moulding depth 3/8" (10mm) 3/8" (10mm)
Max. planning depth 5/16" (8mm) 5/16" (8mm)
Speed 7000 R.P.M. 7000 R.P.M.
Cutterhead diameter 2-27/32" (72mm) 2-27/32" (72mm)
Motor 4.1 HP (3Kw) x 1
3 HP (2.2Kw) x 1
BOTTOM HORIZONTAL SPINDLE    
Width 128" (300mm) 128" (300mm)
Max. moulding depth 3/16" (5mm) 3/16" (5mm)
Max. planning depth 5/32" (4mm) 5/32" (4mm)
Speed 7000 R.P.M. 7000 R.P.M.
Cutterhead diameter 2-27/32" (72mm) 2-27/32" (72mm)
Motor 4.1 HP (3Kw) x 1 4.1 HP (2.2Kw) x 1
RIGHT & LEFT VERTICAL SPINDLE    
Max. cutting height 4" (100mm) 4" (100mm)
Max. cutting depth 13/16" (21mm) 13/16" (21mm)
Spindle diameter 1-1/4" (31.75mm) 1-1/4" (31.75mm)
Max. cutter head diameter 51/2" (140mm) 51/2" (140mm)
Speed 7000 R.P.M. 7000 R.P.M.
Cutterhead diameter 3-1/2" (90mm) 3-1/2" (90mm)
Motor 4.1 HP (3Kw) x 2 3 HP (2.2Kw) x 2
TABLE    
Area 1030 x 630 mm 1030 x 630 mm
Elevation 230 mm 230 mm
POWER table (raise) - -
FEED SYSTEM    
Speed (variable) 11 - 52 ft/min. 11 - 52 ft/min.
Motor 1/2 HP (0.375Kw) x 1 1/2 HP (0.375Kw) x 1
DUST HOOD OUTLET 4" (101.6mm) x 4 4" (101.6mm) x 4
MACHINE SIZE    
Machine dimensions (LxWxH) 1375 x 1080 x 1210 mm 1375 x 1080 x 1210 mm
Packing dimensions (LxWxH) 1230 x 1080 x 1130 mm 1230 x 1080 x 1130 mm
Net weight 525 kgs (1157 lbs) 525 kgs (1157 lbs)
Gross weight 620 kgs (1366 lbs) 620 kgs (1366 lbs)

* The above data are not binding to details as improvements are incorporated from time to time.

˄